電力中央研究所

報告書「電力中央研究所報告」は当研究所の研究成果を取りまとめた刊行物として、昭和28年より発行されております。 一部の報告書はPDF形式で全文をダウンロードすることができます。

※ PDFのファイルサイズが大きい場合には、ダウンロードに時間がかかる場合がございます。 ダウンロードは1回のクリックで開始しますので、ダウンロードが完了するまで、複数回のクリックはなさらないようご注意願います。

電力中央研究所 報告書(電力中央研究所報告)

報告書データベース 詳細情報


報告書番号

N06003

タイトル(和文)

ゾノトライト高含有型耐熱コンクリート製造技術の開発

タイトル(英文)

Development of manufacturing method of thermal-resisting concrete with highly synthesizing xonotolite

概要 (図表や脚注は「報告書全文」に掲載しております)

ゾノトライトは,セメント系材料の中で最も安定性の高いとされる化合物の一つである。著者らはトバモライト,ゾノトライトのような安定化合物に着目した無収縮コンクリートの開発を行ってきた。本研究では,低Ca/Si比のセメント系材料を用い,オートクレーブ養生を施すことで乾燥収縮を生じないコンクリートの製造手法を提案した。その圧縮強度は約40N/mm2,そして110℃乾燥条件下で1年間に生じる収縮量は0.04~0.06%である。乾燥条件下では耐熱コンクリートから逸散する結晶水は認められず,コンクリート中の合成化合物が安定していることを明らかにした。一方,在来型のセメント系モルタルの乾燥収縮量は0.1~0.13%であり,C-S-Hコロイド表層部から逸散する結合水量が多いためにC-S-Hコロイド間の細孔を拡大することを明らかにした。

概要 (英文)

Xonotolite is one of the most stable Ca-Si hydration compounds in the cementitious material. The authors have been developing anti-drying shrinkage concrete with focusing on the stable compounds, i.e. Tobermorite and Xonotolite. In this study, we proposed the manufacturing method of anti-drying shrinkage concrete with using low calcium/silica ratio cementitious material and applying autoclave curing. The compressive strength of proposed concrete was about 40N/mm2, and drying shrinkage under 110oC for 1 year was ranged from 0.04 to 0.06%. There was no amount released of combined water from the proposed concrete during the drying exposure, so the stability of main synthesized compound in the proposed concrete was clarified. On the other hand, the conventional cementitious mortar showed from 0.1 to 0.13% of drying shrinkage and high amount release of combined water from the surface area of C-S-H colloid with resulting to widen the volume of pore among the colloid particle of C-S-H.

報告書年度

2006

発行年月

2006/11

報告者

担当氏名所属

山本 武志

地球工学研究所 バックエンド研究センター

廣永 道彦

地球工学研究所 バックエンド研究センター

キーワード

和文英文
ゾノトライト Xonotolite
トバモライト Tobermorite
収縮 Shrinkage
耐久性 Durability
オートクレーブ Autoclave
Copyright (C) Central Research Institute of Electric Power Industry