電力中央研究所

報告書「電力中央研究所報告」は当研究所の研究成果を取りまとめた刊行物として、昭和28年より発行されております。 一部の報告書はPDF形式で全文をダウンロードすることができます。

※ PDFのファイルサイズが大きい場合には、ダウンロードに時間がかかる場合がございます。 ダウンロードは1回のクリックで開始しますので、ダウンロードが完了するまで、複数回のクリックはなさらないようご注意願います。

電力中央研究所 報告書(電力中央研究所報告)

報告書データベース 詳細情報


報告書番号

Q06013

タイトル(和文)

SUS316Lステンレス鋼の溶接熱影響部の硬化現象と引張特性の関係 -動的ひずみ時効の発現に及ぼす温度とひずみ速度の影響-

タイトル(英文)

Relationship between the hardening phenomena on welding heat-affected-zone and the tensile property in SUS316L stainless steel.

概要 (図表や脚注は「報告書全文」に掲載しております)

低炭素ステンレス鋼の溶接熱影響部における材料硬化に影響すると考えられる動的ひずむ時効について、動的ひずみ時効が発現する条件となる温度およびひずみ速度を明らかにするため、温度およびひずみ速度をパラメーターとしたSUS316L材の引張試験を実施した。本研究から得られた結果は、(1)動的ひずみ時効の発現で認められる応力-ひずみ線図上の鋸刃形状(セレーション)には、振動数が異なる2種類の形状が存在した。(2)セレーションが発現する条件は、見かけ上の活性化エネルギーが約150kJ/molと約290kJ/molの温度依存性を示す2本の境界線に囲まれる領域に存在した。(3)一定のひずみが付与された場合の材料硬化の割合は、ある温度で最大値を示し、ひずみ速度が低いほど低温側にシフトし、高い値を示した。さらに、各ひずみ速度において、材料硬化の割合が最大値を示す条件は、2種類のセレーションが発現する境界近傍に存在することが明らかになった。

概要 (英文)

The dyanmic strain aging phenomena is believed to be one of the important mechanisms which harden the weld heat affected zone of low carbon austenitic stainless steels. Hence, we investigatedthe effects of test temperature and the strain rate during tensile tests on the dynamic strain aging of type 316L stainless steel (SS) in this study. The results obtained are as followings ; (1)Two types of stress-strain curves were obtained with regards to the serration caused by the dynamic strain aging in the tensile tests with different test temperatures and strain rates, one with high frequency of the serration and the other with low frequency. (2)The area where the serration being observed was determined by two lines showing the temperatture dependency of the strain rate in the form of e=Aexp{-Q/(RT)}, where A: constant, Q: apparent activation energy (150 kJ/mol or 290 kJ/mol), R: gas constant, T: absolute temperature. (3) The increae in micro-Vickers hardness of type 316L SS after being strained to certain strains showed maximum values determined by the combined effect of the test temperature and the strain rate. The largest increase in the hardness was obtained at the condition of the lowest temperature and strain rate among the test condition.

報告書年度

2006

発行年月

2007/06

報告者

担当氏名所属

加古 謙司

材料科学研究所 機能・機構発現領域

宮原 勇一

材料科学研究所 機能・機構発現領域

秀 耕一郎

材料科学研究所 機能・機構発現領域

黛 正己

材料科学研究所 機能・機構発現領域

キーワード

和文英文
オーステナイト系ステンレス鋼 Austenitic Stainless Steel
低炭素ステンレス鋼 Low-Carbon Stainless Steel
引張特性 Tensile Property
動的ひずみ時効 Dynamic Strain Aging
マイクロ硬度 Micro Vickers Hardness
Copyright (C) Central Research Institute of Electric Power Industry