電力中央研究所

報告書「電力中央研究所報告」は当研究所の研究成果を取りまとめた刊行物として、昭和28年より発行されております。 一部の報告書はPDF形式で全文をダウンロードすることができます。

※ PDFのファイルサイズが大きい場合には、ダウンロードに時間がかかる場合がございます。 ダウンロードは1回のクリックで開始しますので、ダウンロードが完了するまで、複数回のクリックはなさらないようご注意願います。

電力中央研究所 報告書(電力中央研究所報告)

報告書データベース 詳細情報


報告書番号

M07008

タイトル(和文)

ガスタービン高温部品保守最適化支援システムの開発 -コスト評価における有効性の実証-

タイトル(英文)

Development of Maintenance Planning Optimization Support System for Gas Turbine Hot Gas Path Parts - Verification of effectiveness in cost evaluation-

概要 (図表や脚注は「報告書全文」に掲載しております)

「ガスタービン高温部品保守最適化支援システム」によるコスト低減効果を実証するため、実発電所を想定した仮想データにより、実際のガスタービンユーザの意見を聞くなどして決定した6つのケースについて検討を行った。それぞれのケースは、次の通りである。1)ガスタービンの新規導入時に予備品の数を検討する場合。2)点検開始日を当初予定から変更する場合。3)部品グループ内の各部品の使用履歴が異なり、途中で部品グループの構成を変更する場合。4)等価運転時間の換算係数を途中で変更する場合。5)最適な補修のタイミングを検討する場合。6)異なる仕様を持つ部品を導入する場合。検討の結果、ケース1については、部品の補修期間をパラメータとして、最適な予備品数を示すことができた。ケース2、3、4については、各種コストの変化を示すことができた。ケース5については、補修のタイミングと総補修コストの関係を示すことができた。ケース6については、異なる仕様の部品を導入した場合の各種コストの変化を示すことができた。これらの結果から、本システムは、実際の保守の現場で想定される部品ローテーション計画の作成に有効であることが分かった。

概要 (英文)

Six case studies to evaluate the effectiveness in cost reduction by "Gas Turbine Hot Gas Path Parts Maintenance Planning Optimization Support System" were conducted with realistic plant data. These data were determined based on the actual maintenance practices in power plants. Each case is based on the followings: 1) the schedule number of spare parts sets is optimized when a new gas turbine plant is built. 2) inspection beginning dates are changed from the originally planned ones. 3) the parts groups are regrouped when the remaining life of each part is dispersed. 4) the coefficients of equivalent operating hours (EOH) are modified from the original ones. 5) the optimum repair timing is examined. 6) new specification parts are introduced. As a result of the case studies, the optimum number of spare parts sets were determined depending on the repair period for Case 1), the maintenance costs were estimated for Cases 2), 3) and 4), the relationship between the repair timing and the total repair cost was obtained for Case 5), and the maintenance cost by employing the new specification parts was estimated for Case 6). From these results, it has been validated that this system will enable the users to produce complex parts rotation planning in actual power plant conditions.

報告書年度

2007

発行年月

2008/03

報告者

担当氏名所属

藤井 智晴

エネルギー技術研究所 プラント工学領域

藤岡 照高

エネルギー技術研究所

キーワード

和文英文
火力発電 Thermal Power Generation
ガスタービン Gas Turbine
高温部品 Hot Gas Path Parts
保守計画 Maintenance Planning
コスト評価 Cost Estimate
Copyright (C) Central Research Institute of Electric Power Industry